Bingo Plus stock

The Bingo Plus stockengine is slightly water, which needs emergency maintenance. When we run a boat at sea, the engine is the heart and soul of our ship. Whether you're fishing or traveling on a yacht, the engine is the core element of keeping the boat running. However, when the engine is slightly flooded, it can cause great tension and anxiety.Slight water in the engine is the engine's entry into seawater or other liquids, which is usually caused by friction, oxidation or damage to engine parts. Usually, this kind of water inlet is slight and will not cause too much damage to the ship. It only needs quick treatment and overhaul to make the ship work again. Once you find signs of water entering the engine, it is important to stop the engine immediately and get help. Because the engine is easily damaged after water inlet, if it is not handled in time, the ship may suffer long-term downtime losses and high repair costs. Before the inspection, all equipment on board, especially the power supply, need to be turned off. If the engine has been stopped and no more water enters, the warehouse door on the ship can be opened to avoid moisture and acid corrosion. If you are not sure about the cause of the water, you need to inform the professional craftsman for inspection and repair as soon as possible.If the engine does have slight water, and it is only a leak caused by local damage, you can turn on the submersible pump on the ship to pump out. Then carry out a comprehensive inspection, mainly checking whether the oil compartment, oil pressure, fuel compartment, gas compartment and hydraulic compartment are water or damp. If the interior is already wet, complex cleaning and drying work is required, and then try to restart the engine. For engines with slight water inlet, drying equipment and fans can be used to assist in drying the oil, filter element and thermal insulation pad. In addition to these measures, the system needs to be checked more frequently to ensure that further damage has been stopped or reduced. If the equipment on board has high concentration requirements for engine oil and lubricants (such as ship radiators or fuel tanks), it needs to be replaced in time. If the signs of water in the engine are serious, the internal parts need to be checked more deeply.It is necessary to remove the engine from the ship and thoroughly clean any wading parts. These parts that invade liquids need special moisture-proof treatment to ensure that they will no longer enter water in the future. After replacing all damaged parts and lubricating, reinstall the engine and conduct testing and monitoring. Finally, preventive measures and regular maintenance can help reduce the risk of water entering the engine. Clean the engine and the bottom of the ship regularly to prevent seagrass, shellfish and other debris from blocking the water inlet, and check the sealing of pipes and joints. If a problem is found, it can be repaired in time to ensure the normal operation of the engine parts and systems. In a word, if there is slight water in the engine, timely measures and emergency maintenance are needed. If preventive measures and regular maintenance are also guaranteed, the safety and reliability of ships and engines can be maximized.Through reasonable maintenance, we can enjoy the pleasant journey of ships sailing to further waters.

Contact Us
Phone：020-83484667