DigiPlus stock

List of contents of this article:

• 1,DigiPlus stockWhat to do if the computer can't enter the system
• 2,What to do if the computer can't enter the system
• 3, What to do if the computer starts and can't enter the system
• 4, What to do if the computer can't enter the system after starting

What to do if the computer can't enter the system

1. Before entering the operating system Press the F8 button, then select the last correct configuration, and then press the Enter key. You can consider reinstalling the system. Before reinstalling the system, please make sure that you have available Windows installation media (such as DVD or USB flash drive) and all important data backups.

2. Method to automatically repair The computer is turned on, immediately press F8 until the following page appears, and then use the keyboard to select the last correct configuration, and then press the return key, wait for the system to automatically repair to complete then turn on.

3. Solution: After restarting the computer, press the keyboard shortcut F8, and the advanced options interface will appear. Select "Safe Mode" to enter. Then the drivers that cause the system to crash through antivirus and uninstall depend on what the computer did before the problem occurred.

4. When the computer cannot enter the system, we can take the following methods to solve it. The last correct configuration. After the computer starts up, you should press the F8 button before entering the operating system, then select the last correct configuration, and then press the Enter key.

What if the computer can't enter the system

If the computer can't enter the system, you can try the following steps: Check whether the computer hardware is normal, such as whether the power supply, memory, hard disk, etc. are connected or damaged.

After power-on, you can press F8 to see if you can enter the safe mode, or the correct mode configured for the last time. If you can enter, it can be automatically repaired later to solve the problem that the computer cannot enter the system.

Modify the boot order: If the computer cannot recognize the hard disk at startup, we can enter the BIOS interface, modify the boot order, and put the hard disk at the top of the device list. In this way, the computer can start the system normally. Check for hardware problems: If there is a problem with the hardware inside the computer, it may need to be replaced or repaired.

In most cases, the computer can't enter the system after power-on is caused by a system crash, but there are many specific situations. The wrong graphics card driver is updated in the wrong way to update the graphics card driver. In this case, it can be repeated.Start the computer, press F8 to enter the safe mode, select the latest correct configuration, and press Enter to repair.

Before entering the operating system, you should press the F8 button, then select the last correct configuration, and then press the Enter key. You can consider reinstalling the system. Before reinstalling the system, please make sure that you have available Windows installation media (such as DVD or USB flash drive) and all important data backups.

When the computer cannot enter the system, we can take the following methods to solve it. The last correct configuration. After the computer starts up, you should press the F8 button before entering the operating system, then select the last correct configuration, and then press the Enter key.

What to do if the computer starts and can't enter the system

1. Unable to enter the system normally, generally because of the software Or it is caused by hardware failure. There are many and complex reasons. It may be that the system file is damaged, it may be a virus infection, it may be that there are too many background self-starting programs or multiple security software installations that cause the system fake death, or it may be that there is a problem with the graphics card or memory.

2. Shut down and remove the memory and hard disk, clean up the gold hand pointer foot and slot before plugging in, and try to turn on. The test fault of the mobile hard disk cannot be ruled out. Take the hard disk to a friend's house, install it into the hard disk as a mobile hard disk, hang it on your friend's computer, and try to see if it runs normally.

3. It is a common problem that the computer cannot enter the system when it is turned on. This article will introduce several solutions to you. After the last correct configuration is turned on, press F8 and other shortcut keys to enter the advanced boot option, and select to enter the "last correct configuration". If the problem is not serious, the last correct configuration will be automatically repaired.

4. Check whether the computer connection is normal: Check whether all the devices connected to the computer, such as monitor, keyboard, mouse, power supply, etc., are connected normally. If it is loose or disconnected, it needs to be reconnected.

5. If it still doesn't work, you can try to restore the Windows system to restore the computer to normal without destroying the data. If the restoration can't be solved, then you can only choose the old Maotao USB boot disk to reinstall the system.

6. Lenovo thinkpad can't start the system solution: use safe mode to start the computer and use the system repair tool. Use safe mode to start the computer. If the above two methods cannot solve the problem, we can try to use safe mode to start the computer.

What to do if you can't enter the system after the computer starts

1. Check whether the computer hardware is normal: Check whether the computer has abnormal sound, lights, etc. If there is, it may be a hardware failure and needs to be repaired or replaced.Check the boot order of the computer: Check whether the boot order is correct in the BIOS settings to ensure that the hard disk is the first startup item.

2. If the computer cannot enter the system after starting up, you can try the following steps: Check whether the computer hardware is normal: Check whether the computer has abnormal sound, lights, etc. If so, it may be caused by hardware failure. You can try to plug and unplug the hardware device again, or disassemble the computer and clean it up.

3. If the computer cannot enter the system after booting, you can try the following methods: check whether the computer hardware is normal, such as whether the hard disk, memory, graphics card, etc. are plugged in. Try to enter the safe mode, press the F8 key or other shortcut keys to enter the safe mode, and then repair it.

4. If the computer can't enter after startingSystem, you can try the following methods: check whether the computer hardware is normal, such as whether the hard disk, memory, graphics card, etc. are plugged in. Try to enter the safe mode, press the F8 key or other shortcut keys to enter the safe mode, and then repair it.

5. Check whether the computer hardware is normal: check whether the computer has abnormal sound, lights, etc. If there is, it may be a hardware failure and needs to be repaired or replaced. Check the boot order of the computer: enter the BIOS settings, check whether the boot order is correct, and make sure that the hard disk is the first startup item.