DigiPlus stock

The DigiPlus stockengine can't start: What should I do? The engine of the vehicle is one of the key parts to ensure the normal operation of the vehicle. Once the engine fails to start or run, the vehicle cannot drive, which is a very disadvantageous situation for the driver. An engine that cannot be started may be due to many reasons. This article will briefly introduce some common causes and coping methods. 1. Engines that lack fuel or gas need fuel or gas to operate normally. The reason may be insufficient fuel, gas leakage or gas supply problems. The solution is to check the fuel and gas supply and check whether the fuel oil level is sufficient. If the oil level is insufficient, fill up the oil and restart the engine. If it burnsThe oil supply is normal. There may be a problem with the fuel pump or gas supply system, and you need to find professional maintenance personnel to repair it. Two. Battery problem The life of the battery is limited, especially in extreme environments such as hot weather, the battery life may be shorter. If the battery power is too low, it may cause engine start-up problems. If the start-up sound of the vehicle is a slow "da-da" sound, even a short-term use of the truck electrical system needs to be recharged. You can consume the battery power by opening the door, turning on the internal lights, audio and other devices, and then try to restart the engine. If the problem is still not solved, it is recommended to replace the new battery in time. 3. Engine start-up system problem Vehicle engine start-up system is an indispensable part of starting the vehicle. It is composed of automatic transmission (AT) or manual transmission.(MT) and air filter, fuel injector, gas supply, death machine, spark plug, starter and other components. Any of these parts may fail, which will affect the engine startup. Four. Ignition system problem The ignition system may sometimes be damaged. Even if the fuel is sufficient, the engine still cannot be started. In these cases, you should check whether the spark plug or ignition line is working properly, and check whether the car is in focus. If you find a problem with the ignition system after inspection, you need to quickly replace the parts that need to be replaced. If you are unable to solve the problem, it is recommended to contact professional maintenance personnel immediately. In a word, the inability to start the engine is a very disadvantageous situation. Car owners should consciously maintain the vehicle and understand the working principle of the engine to avoid this situation as much as possible.At the same time, you should also pay attention to safety, and do not maintain and repair yourself in unsafe places. If you are not sure about the cause of the problem or can't solve it yourself, you'd better ask a professional to deal with it.

Contact Us
Phone：020-83484667