UEFA Champions League

List of the catalogue of this article:

• 1,UEFA Champions League How to install screws on car license plates?
• 2, How to remove the screws of the car license plate?
• 3, What does car license plate screw mean

How to install screws on car license plates?

Installation method of car license plate screws: First of all, you need to prepare the car license plate to be installed, prepare the corresponding tools, a riveting tool, a Phillips screwdriver, a package of license plate buckles, two small screws, and two nuts.

The installation method of license plate screws is as follows: Prepare tools and materials: license plate screws, screwdrivers or wrenches, and vehicles that need to install license plates. Determine the installation position: Determine the installation position of the license plate according to the design and regulations of the vehicle. Generally speaking, the license plate is installed on the front and rear bumpers of the vehicle.

To find the fixed position of the license plate in front and behind the car, especially the four fixed points on the license plate. Point the license plate at the fixed point of the license plate, aim at the license plate, and prevent misalignment after aligning. You need to support it by hand. Insert the screw into the hole of the trolly fixed point. Fix the screw with a one-word screwdriver.

How to disassemble the screws of the car license plate?

1. To remove the license plate screw, you need to use a one-character change cone, a cross change cone and an angle grinder;Plug in the power supply of the angle grinder, then hold the handle of the angle grinder with both hands, turn on the switch of the corner grinder with your right hand, and cut the screw cap on the license plate straight with the angle grinder.

2. To remove the license plate screw, first prepare 2 screwdrivers, one-word and a cross, and an angle grinder. Use an angle grinder to cut the screw cap on the license plate. There are a total of 8 screw caps. When cutting, you must pay attention to protecting the license plate. Use a screwdriver to pry off the cut screw cap.

3. You can remove the surface of the license plate screw cap first, and the rusty parts also need to be cleaned, which can facilitate the disassembly and installation work later.

4. The method of removing the screw of the car license plate is as follows: clean up the surface of the screw. Find a small screwdriver and poke it under the screw cap. There is a position to press the edge to make the jam, and you can pry off the lid with a little force.

5. You can clean the surface of the license plate screw cap first, and clean up the rusty parts, which can facilitate the disassembly work later.

6. The method of removing license plate screws is as follows: tools: one-word screwdriver, pliers, license plate. Clean up the surface of the screw. Find a small one-word screwdriver and poke it under the screw cover. Find the place where the edge is pressed to make the jam and pry off the lid.

What does the car license plate screw mean

1. The screw on the license plate is called the license plate sealing screw. Every license plate of the car produced after April 2016 must have Four sealing screws. This screw is disassembled to prevent the license plate from being removed. A fixed screw is divided into four parts, namely the anti-theft base, the screw, the anti-theft cover and the nut.

2. License plate anti-theft screws, also known as anti-theft fixing, cannot be removed in the conventional way. Usually, maintenance stations will use electric drill bricks or electric grinding wheels to remove the anti-theft cap. Generally, car owners may not have these two tools. If they are dismantled destructively, the anti-theft screws cannot be used.

3. The nut given by the license plate is used to fix the motionless license plate. In fact, it is not difficult to find that there is a small sign at the top of each license plate nut, which indicates the city where the car is registered.

4. The hexagonal screw cap on the car license plate can prevent some buyers of new cars from removing the motor vehicle license plate without permission. On the other hand, road traffic units can distinguish whether the car is a license plate vehicle according to the nut.