Bingo Plus stock

List of contents of this article:

• 1,Bingo Plus stock How to create a system recovery disk in win10.
• 2, How to make a system recovery disk (USB disk)?
• 3, Disk Repair Method
• 4, What does the recovery partition of the disk mean
• 5, win10 system how to create a USB disk recovery disk
6, How to restore the computer system disk

How to create a system recovery disk in win10.

You can consider other methods, such as starting settings update and security, and selecting restore in the left menu. At this time, you will see multiple different recovery options. We can choose "Reset this computer" to reinstall and choose whether to keep personal files.

Conditions for making a drive restorer: USB flash drive of more than 4GB Note: The system recommends that it is in the activated state.

First of all, we turn on the computer to enter the computer desktop of the win10 system, find the "This Computer" icon on the desktop (some will show "My Computer" or "Computer"), and right-click the icon.

Method/Step 1 Running Media Production Tool We can use Microsoft's Windows 10 Upgrade Assistant to create installation media on CD-ROM or USB flash drive.Download and use this tool, and we can choose "Create Installation Media for Another Computer".

Protect several disks and set up several disks according to the above method. In this way, the system will automatically back up, and you can also back up manually. Select the bottom of this page to create and create the restore point by yourself. The restoration method is: right-click the computer to select properties, select system protection on the right, system restore, and follow the steps.

Select this computer on the Win10 system desktop and right-click to select the properties, as shown in the figure below. Click System Protection on the left side of the system window. As shown in the figure below. In the system protection tab of the system properties window, create a restore point for the C disk.

How to make a system recovery disk (USB disk)?

Reinstalling the system can solve the problem. The operation steps of system USB disk production and reinstalling the system are to make a boot USB disk and go to the physical store to buy a 4-8G USB disk (you can ask the boss to help make it into a system USB disk to omit the following steps). Search and download the installer's USB disk startup PE production tool on the Internet. , insert the USB flash drive into the computer to run this software to make a boot USB flash drive.

First of all, let's take the USB flash drive to do it.A demonstration, after inserting the USB flash drive into the computer, double-click to open the UltraISO floppy disk pass, and the following program box will appear. Click File - Open to find the location of your ISO file. Double-click will introduce the ISO file into this program.

After the computer is turned on, the recovery window is displayed. We press F9 on the keyboard to use other operating systems. At this time, a window of "Select Operating System" will open, and left-click: Windows10.

Operation steps: 1. Download the mirror image. First, declare and license terms. Click [Accept] whether it is installed on this machine or another machine. Select [Create Installation Media for another computer] to select the language, version, etc. You can directly select [USB disk], and you can directly download and install it to the USB disk.

Disk Repair Method

1. Method 1: Use the system's built-in tools Windows operating system has some tools to repair disks: open "My Computer" or "This Computer" and right-click the disk that needs to be repaired. Select "Properties" and then click the "Tools" tab. Click the "Check" button, and the system will automatically detect and repair errors on the disk.

2. Use the CHKDSK command: In the Windows operating system, you can use the CHKDSK command to check and fix errors in the hard disk. Open the command prompt window and enter "chkdsk C: /f" (where C is the letter of the hard drive), and then press Enter. CHKDSK will scan and fix the errors in the hard disk.

3. If the disk is damaged due to illegal shutdown or other reasons, please repair it (repair each disk or only repair the prompt C.

4. The following are several common ways to repair laptop disks: the method is to use the disk detection and repair tool included in Windows: right-click the disk to be detected or repaired and open the properties. Select the "Tools" page and click "Check" in the error check.

5. This is a very helpless way, but a 20G hard disk, if 15G is blocked due to a bad channel, there is always 5G space available. If you don't do this, the final result is that the entire hard disk will be scrapped.

6. Open "Control Panel", select "System and Security", and then click "SystemUnify", select "System Protection" on the left panel, click "System Restore", and follow the prompts. Run the disk check tool: Another solution is to use the system's built-in disk check tool.

What does disk recovery partition mean

Disk recovery partition in good condition means that the disk is in good working condition and the partition recovery operation can be performed. The good condition of the disk means that the disk has no hardware failure or damage, and the data can be read and written normally.

What does the recovery partition of the disk mean? In the Windows operating system, the recovery partition is a special partition used to store system backup and recovery tools. This partition usually contains the manufacturer's pre-installation.The recovery tools and drivers can help you recover your computer in case of system crashes or other problems.

What is the hard disk recovery partition? The hard disk recovery partition refers to the re-establishment of the partition on the hard disk so that it can work normally and access the data stored in it when performing data recovery operations on the hard disk. The purpose of creating partitions on the hard disk is to divide the hard disk into different logical areas to facilitate the management and storage of files.

How to create a USB disk recovery disk in win10 system

Conditions for making a driver restorer: USB disks of more than 4GB Note: The system recommendation is to be in an active state.

Run media production tools. We can use Microsoft PushThe Windows 10 upgrade assistant creates installation media on the disc or USB flash drive. Download and use this tool, and we can choose "Create Installation Media for Another Computer".

The first step is to double-click or right-click to open the browser software, and then download and install the USB disk boot disk making tool. Because making USB disk winpe involves reading and writing functions, I would like to remind you here that in order to avoid production failure, we need to close the corresponding anti-virus software first.

Today, I will introduce the specific operation steps of how to reinstall the win10 system with a USB flash drive. It takes two steps to reinstall the USB disk: make a USB disk boot disk, and then reinstall the system. Let's introduce the two steps in detail.

Operation steps: 1.Download the mirror image. First, declare and license terms. Click [Accept] whether it is installed on this machine or another machine. Select [Create Installation Media for another computer] to select the language, version, etc. You can directly select [USB disk], and you can directly download and install it to the USB disk.

When we are using a win10 system computer, what should we do if we want to use the USB flash drive to create a password reset disk in the computer? Next, the editor will tell you. The details are as follows: In the first step, turn on the computer and insert the USB flash drive into the computer, and then double-click the control panel icon on the desktop.

How to restore the computer system disk

First of all, we turn on the computer to enter the computer desktop of the win10 system, on the desktopFind the "This Computer" icon on the face (some will display "My Computer" or "Computer") and right-click the icon.

First of all, right-click the [Start] icon in the lower left corner of the mouse, and click the [Run] option in the pop-up menu bar as shown in the figure below. In the second step, after opening the [Run] window, enter [sysprep] in the box and click the [OK] option as shown in the figure below.

First, turn on the computer, right-click AuroraDataRecovery, find the option to run as administrator in the pop-up options interface and click to open. After the software runs, double-click the physical disk that needs to be restored directly. It usually takes a few minutes to half an hour for the software to complete the scanning.

The restoration method is: WiN7 or 8 restore the system, right-click the computer to select properties, select system protection on the right, system restore, and follow the steps.

After the computer reinstalls the system, if the data of the C disk is lost, you can refer to the following methods to recover: Recycle Bin Recovery: Open the Recycle Bin, find the corresponding file, and click Restore to retrieve the lost file.