DigiPlus fair value

List of contents of this article:

• 1,DigiPlus fair value There are two versions of Mondeo Zhisheng 11 engine power. Why is this?
• 2, Ford EcoBoost, high-pressure common rail in-cylinder direct injection system, what are the advantages of in-cylinder direct injection?
• 3, What does car gtid mean

There are two versions of Mondeo Zhisheng 11 engine power. Why is this?

1. Mondeo Zhisheng is a medium-sized sedan under Ford, which adopts threeThe engines are 0-liter turbocharged engine, 0-liter naturally aspirated engine and 3-liter naturally aspirated engine respectively. The Zhisheng wheelbase of Mondeo reaches 2850mm, and the length, width and height are 4854mm, 1886mm and 1495mm respectively.

2. The new generation of Mondeo will have the world's first 5T model, as well as the 0T engine with different high and low power tuning, which has been installed on the current model.

3. The maximum power of Mondeo Zhisheng's 0-liter turbocharged engine is 175kw and the maximum torque is 340 Nm. This engine can output the maximum torque at 1900 to 3500 rpm and the maximum power at 6000 rpm. This engine is equipped with in-cylinder direct injection technology and uses aluminum alloy cylinder head and cylinder block.

4. The Mondeo 3 engine Ecoboost is a new power technology of Ford Motors, which has obtained 125 patents in the United States.

5. The GTDI engine equipped with the new Mondeo Zhisheng is an EcoboostGTDI engine that integrates the three key technologies of turbocharging, direct injection in the fuel cylinder and dual independent variable valve timing system. It is powerful and endless, so that the driver can feel its power at any time.

6. Mondeo-Zhisheng currently has 3 displacement models: 0L, 3L, 0T. Among them, 0 turbocharged models are divided into high-power versions (240 horsepower) and low-power versions (203 horsepower). There is no model with a displacement of 6L or less, but the next generation may consider introducing a 6T turbocharged version.

Ford EcoBoost, high-pressure common rail in-cylinder direct injection system, what are the advantages of in-cylinder direct injection?

1. In general, the independent injection control ability of in-cylinder direct injection technology can make the engine have the most efficient fuel utilization rate under various working conditions.The increase in horsepower can be about 10%, and the fuel consumption is not much different. As consumers and manufacturers, there is really no reason to refuse this advanced technology.

2. Advantages of in-cylinder direct injection engine: layered combustion can control the nozzle, and before the piston compression stroke reaches the highest point, the spark plug begins to spray instantly; during the combustion process, the air layer isolates the heat and reduces the heat transfer to the cylinder wall, thus reducing heat loss and improving the engine's Thermal efficiency.

3. The in-cylinder direct injection technology engine can accurately control the ratio of air to fuel in each cycle. Combined with stratified combustion direct start technology, it can reduce HC emissions during cold start, and the transient response is good.

4. What are the advantages of in-cylinder direct injection engine? High efficiency: collectUsing in-cylinder direct injection technology, the fuel is directly injected into the combustion chamber, which avoids the generation of mixed gas in the intake duct, making the fuel combustion more adequate and the performance better.

5. In-cylinder direct injection, abbreviated as GDI, is the technology of directly spraying fuel into the cylinder and mixing the intake. The advantages of in-cylinder direct injection are low fuel consumption, large lifting power, and a compression ratio of up to 12. Compared with ordinary engines with the same displacement, the power and torque are increased by 10%. Then its disadvantage is that the components are complex and the price is usually expensive.

What does car gtid mean

The new 5GTID was independently developed by Haver at a high cost to make up for the shortcomings of the old engine in terms of power and fuel consumption. Brand-new 5GDIT is the first engine generated by CVVL variable valve in an independent automobile enterprise. It adopts in-cylinder direct injection, inlet and exhaust dual VVT, cylinder head integrated exhaust manifold and other technologies.

Guidance: Hello, according to your description of your situation, the prescription 0.4gtid means 0.4 grams each time, 3 times a day.

.500gtid is to take medicine three times a day. According to the relevant information of the query, 0.5g is the specification of the drug, tid means taking the medicine three times a day, indicating taking the medicine three times a day.

Haval H6 is the main model under the Haval brand. On August 25, 2011, the Haval H6, which is positioned as an urban intelligent SUV, was launched in the Great Wall Automobile Tianjin New Factory, providing Mitsubishi 0L gasoline-powered models and Green Jing 0T diesel models, which are divided into three versions: urban, elite and noble. Ben.