DigiPlus stock

Engine EPC failure,DigiPlus stock how to solve it? With the continuous development of automobile technology, the performance of automobiles is getting higher and higher, and the parts are becoming more and more complex. Among them, the engine is very important as the core part of the car. However, sometimes we also encounter engine EPC failure. What should we do at this time? First of all, we need to know what engine EPC is. EPC is known as Electronic Power Control, which is translated into Chinese as "Electronic Power Control System". This system is one of the important electronic control systems in modern cars. It can control the ignition, fuel injection, valve control, electronic intake valve, etc. of the engine according to the working conditions of the vehicle to ensure the performance and efficiency of the engine.When the engine EPC light turns on, it usually means that there is a problem with the automotive electronic system and needs to be checked and repaired. Then let's introduce the causes and solutions of engine EPC failure. I. Reason 1. Failure of the electronic control unit: When there is a problem with the electronic control unit, the EPC light will turn on. Usually, the control unit needs to be replaced in this case, but it is also possible that a component of the control unit is faulty, so a detailed inspection is needed. Two. Sensor failure: There are many sensors on the car, which involve the monitoring of various parameters, including oxygen sensors, air flow sensors, throttle position sensors, crankshaft position sensors, etc. If one of the sensors fails, the EPC light will also turn on. 3. Ignition system failure: The ignition system is an important system to ensure the normal ignition of the engine. If it fails, it will also cause the EPC light to turn on. Four. Throttle problem: The matching between the throttle and the air flow sensor is the basis for the normal operation of the engine. If there is a problem with the throttle valve, such as blockage or premature shutdown, the engine will not work properly. II. Solution 1. Check and replace the electronic control unit: When the EPC light is on, the vehicle needs to be sent to a professional repair shop for inspection to determine whether the electronic control unit is faulty. If so, then the unit needs to be replaced with a new control unit. Two. Replace the fault sensor: If the reason why the EPC light is on is a sensor failure, then you only need to replace the fault sensor. Usually, this kind of repair is not expensive and easy to carry out.3. Replace the ignition system parts: If the ignition system fails, the corresponding parts need to be replaced. Common faulty parts include spark plugs, ignition coils, batteries, etc. Four. Check and adjust the position of the throttle valve: If the throttle valve is not closed normally, it needs to be checked and adjusted. This process requires professional technicians to operate. In a word, don't panic when the engine EPC light turns on. According to experience, if the vehicle still has loud noise, jitter, shutdown, etc., it means that the fault is relatively serious and needs to be stopped for inspection immediately; if it is just a simple EPC fault light on, you can stay calm and find a professional technician to check and repair. Note that don't try it yourself. Trying to repair it by yourself may cause new failures and aggravate the damage. I hope this article can help you keep the vehicle in good condition and drive safer.

Contact Us
Phone：020-83484667