Hearthstone arena deck Builder

List of contents of this article:

• 1, What should I do if win10 is stuck in the boot interface and can't enter the system?
• 2,What to do if you can't enter the system after the computer is turned on
• 3、 What should I do if I can't get in the circle when I turn on win10?
• 4,win10 can't enter after reinstalling the system with one click

What should I do if win10 is stuck in the boot interface and can't enter the system?

The specific method is as follows: As shown in the figure below, win10 normally pops up the user login interface, enters the correct password, and it is displayed, and then stays in this state. The machine does not die. You can even enter the ctrlaltdel key to pop up the lock window, but you can never enter the system. Unify.

Force restart: Long press the power button for 10 seconds to force the computer to shut down completely, and then press the power button to start the computer.This method can usually solve some temporary problems, such as software conflicts or driver problems.

If it is stuck for too long, it is recommended to press the power button for a long time until the power is cut off. After restarting, if you still can't enter the system, it is recommended to use the automatic repair function, which can detect and solve some system problems and prevent Windows from starting.

The win10 system is stuck in the welcome interface after entering the password. The automatic infinite restart is caused by a system error. The specific solution steps are as follows: First, turn on the computer, tap F8 to enter the security interface, find the "Troubleshoot" option in the interface and click it. Then find the "Advanced Options" option in the interface and click it with the mouse.

What to do if the computer can't enter the system after the computer is turned on

Check whether the computer hardware is normal: check whether the computer has abnormal sound, lights, etc. If so, it may be hard The part is faulty and needs to be repaired or replaced. Check the boot order of the computer: Check whether the boot order is correct in the BIOS settings to ensure that the hard disk is the first startup item.

If the computer cannot enter the system after booting, you can try the following methods: check whether the computer hardware is normal, such as whether the hard disk, memory, graphics card, etc. are plugged in. Try to enter the safe mode, press the F8 key or other shortcut keys to enter the safe mode, and then repair it.

If the computer cannot enter the system after starting, you can try the following steps: Check whether the computer hardware is normal: Check whether the computer has abnormal sounds, lights, etc. If so, it may be caused by hardware failure. You can try to plug and unplug the hardware device again, or disassemble the computer and clean it up.

Solution 5: Reinstall the system on the USB flash drive. If the above methods cannot be solved, we can only adopt the ultimate solution: the USB disk installation system can solve 99% of computer software failures. UseUSB disk boot disk making tool, make USB disk boot disk, and then enter PE to install the system.

The reason why the computer can't enter the system after power-on Startup order problem: In the BIOS, we can set the boot order of the computer. If we place optical drives, USB flash drives and other devices before the hard disk, the computer will detect these devices in the order of startup, resulting in the inability to start the system normally.

What should I do if I can't get in the circle when I turn on win10?

It is recommended to use the automatic repair function, which can detect and solve some system problems and prevent Windows from starting. To run automatic repair, please follow the steps below: 1 Boot toWinRE (Windows Recovery Environment) can be understood as recovery mode.

Wait for a period of time: Sometimes the system may take some time to complete the startup process, especially after the update. You can wait patiently for a while to see if it can start normally. Force restart: If there is still no response after waiting for a period of time, you can try to force restart the computer.

At this time, we will enter the interface of startup settings. We press the F7 key on the keyboard and choose to disable the driver's mandatory signature to solve the problem that Win10 has been spinning and cannot enter the system. The personal test is effective, and more than 70% can solve this problem. Of course, a small number of people may not be able to solve it.

Win10 one-click reinstalling system can't enter the solution

When Win10 can't enter the desktop after updating, the most effective solution is to enter the "System Menu" interface, through The "safe mode" or "return to the previous system" method to repair and enter the "system menu" method. When the "power" key is forced to shut down and restarted for three or more times, it will automatically enter ".

Solution: At this time, the original Win10 system is still not damaged. You can restart and select Windows10 in the startup item to enter. Then if you want to continue to reinstall the system, use the USB flash drive to install the system.

Version: Win10 Operation Software: Reinstall the system and press the power button for a long time to turn off;Press the power button to turn on the power; repeat steps 1 to 2 times until the repaired page appears, and click the advanced repair option below. After clicking, you will see the following screen. Click "Troubleshooting" in it.

Let's take a look at the specific solution steps with the editor~ I hope it can help you. What should I do if I can't enter the system after installing win10? Restart the computer and press the shortcut key to enter the BIOS interface during the boot process. PS: Because of different computer brands and models, the way to enter the BIOS is also different.

Win10 reinstall system black screen can't enter the interface instance tutorial Enter the computer motherboard BIOS to turn off the secureboot: After restarting the computer, keep pressing the "Del" key at the bottom right of the keyboard to enter, oneGenerally, laptops are "F2" keys (if the F2 key cannot enter, you can ask the manufacturer how to enter the BIOS).

If you can't enter the system after restarting after installing Windows 10, you can try the following common solutions: Method 1: Start in safe mode. Press the power button during the startup process to force the computer to shut down. Repeat the above steps three times. This will trigger Windows 10 to enter recovery mode.